Readytosky 250mm FPV Racing Drone Frame 5 Inch Carbon Fiber Quadcopter Frame Kit with 4mm FPV Frame Arms+Lipo Battery Strap

After receiving this frame, in a well cushioned package, I found upon opening it a neat and orderly boxed 250 quadcopter frame kit . The frame kit consists of the four 4mm thick arms, two bottom plates, top plate, fpv and hd camera mounting plates, four 'legs', eight anodized aluminium standoffs, assembly fasteners, one set of three blade 5045 props (in two colors), and a battery strap. The instruction sheet in the kit is a double sided/language glossy 3d rendering of the frame. It has the correct build information presented including parts placement and fastener identification. I found the build of the arms between the two lower plates to be a little more of a hassle, but not difficult, and very supportive of the arms. The space between the lower plates was a good place to put wiring. The standoffs were of good quality and went into the assembly without problems. The top plate is one part that i would like to see improved. With of a thickness of only 1.5mm, it is not a very durable part. It is sufficient to build and fly with, but even another .5mm would have been an improvement. The cushions for the hd camera mount seem to be just about the right hardness to dampen the vibrations of flight. The plate size allows quite a bit of room to mount accessory equipment like battery monitors, video transmitters, and antennas. The standoffs are long enough to provide adequate spacing for a flight stack or a simple power distribution board and flight controller. The arms and plates provided in my kit are well made with no machining flaws. The edges are well manicured with no burrs or chips. The carbon seems to be of good quality. The parts came bagged and very clean and orderly. I might even give the props in the kit a try although they are not my standard 'go to' brand. Overall for a carbon fiber 250 quadcopter frame, I am pleased. I am considering purchasing a second kit as a backup for parts. You should consider this frame if you are looking for an inexpensive daily flyer.

If you are beginning in FPV, buy this frame!It is very durable and rigid. The screw holes are placed so they dont weaken the frame like other similar to this one. Ive crashed this thing (hard) at least 40 times with no fractures or freys on the fiber! I am a daily flyer, I bring my quad pack to work and fly on my way home. The landing gear it comes with suck, dont use them.THIS IS A SOLID REVIEW!

I have the readytosky 2204 2300kv motors and have been searching for a frame that wound actually work with the motors. This worked great thanks. I’m a huge fan of readytosky products

I'm a fairly new quad pilot and used this frame for my first quad since I didn't want to wait a million years for a banggood frame. The price is super reasonable, and it's nice that it comes with a free set of props and a velcro strap. In my first two weeks flying it I had several hard crashes. After a straight down fall from 150-200ft, there was absolutely no damage to the frame. However, after clipping a branch and landing hard on an arm, the carbon fiber arm bent by the motor and negatively impacted the flight characteristics. Additionally, I had been using the included strap for my battery, and after this same crash the velcro strap actually came apart, letting my battery go flying. I recommend using a different velcro strap to hold components of the quad on. I think outside of REALLY hard crashes this frame will do just fine for beginner pilots like myself that aren't ready to drop big bucks on brand name frames.

Great quad frame! Has held up to many ground impacts with no issue. The props it comes with are very brittle, and will explode if you run them into anything, but the trade off is they respond to punch outs very well since there is less prop flex. Over all I will be buying more of these frames. Great starter platform!

Received a used bag of junk which was dirty and greasy in a ziplock bag.It was missing screws as well.Returned it immediately.

This was easy to assemble and has plenty of space to pack in all the goodies. The only con, in my opinion, is that the fpv camera mounting plate isn't very functional. (I'm referring to the plate with the diamond shaped hole in it)Anyway, I used a micro stack for all the essentials, a FrSky R-XSR receiver, and a decent cheap camera. As my first quadcopter build, this was very easy, and budget friendly.

not bad for the price. BUT instructions were tricky to understand and it DIDN'T come with the mount for a small fpv camera like other kits for the price and finding one that fits is another story......